A record of a request for service such as diagnostic investigations, treatments, or operations to be performed.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Identifiers assigned to this order instance by the orderer and/or the receiver and/or order fulfiller.

The identifier.type element is used to distinguish between the identifiers assigned by the orderer (known as the 'Placer' in HL7 v2) and the producer of the observations in response to the order (known as the 'Filler' in HL7 v2). For further discussion and examples see the resource notes section below.

The URL pointing to a FHIR-defined protocol, guideline, orderset or other definition that is adhered to in whole or in part by this ServiceRequest.

Note: This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

The URL pointing to an externally maintained protocol, guideline, orderset or other definition that is adhered to in whole or in part by this ServiceRequest.

This might be an HTML page, PDF, etc. or could just be a non-resolvable URI identifier.

Plan/proposal/order fulfilled by this request.

The request takes the place of the referenced completed or terminated request(s).

A shared identifier common to all service requests that were authorized more or less simultaneously by a single author, representing the composite or group identifier.

Requests are linked either by a "basedOn" relationship (i.e. one request is fulfilling another) or by having a common requisition. Requests that are part of the same requisition are generally treated independently from the perspective of changing their state or maintaining them after initial creation.

Some business processes need to know if multiple items were ordered as part of the same "requisition" for billing or other purposes.

Código que indica el estado actual de la orden o solicitud. Para este perfil, el valor debe ser 'active', ya que se refiere a medicamentos ordenados al egreso del encuentro de atención en salud.

The status is generally fully in the control of the requester - they determine whether the order is draft or active and, after it has been activated, competed, cancelled or suspended. States relating to the activities of the performer are reflected on either the corresponding event (see Event Pattern for general discussion) or using the Task resource.

The status of a service order.

Código que indica la intención de la orden o solicitud. Para este perfil, el valor debe ser 'order', ya que se refiere a una solicitud formal de administración de un medicamento.

This element is labeled as a modifier because the intent alters when and how the resource is actually applicable.

The kind of service request.

Indica el tipo de tecnología en salud, específicamente el tipo de medicamento administrado, según la clasificación oficial establecida por el Ministerio de Salud y Protección Social de Colombia.

There may be multiple axis of categorization depending on the context or use case for retrieving or displaying the resource. The level of granularity is defined by the category concepts in the value set.

Classification of the requested service.

Used for filtering what service request are retrieved and displayed.

A reference to a code defined by a terminology system.

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Allows for alternative encodings within a code system, and translations to other code systems.

A reference to a code defined by a terminology system.

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Allows for alternative encodings within a code system, and translations to other code systems.

The identification of the code system that defines the meaning of the symbol in the code.

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

Need to be unambiguous about the source of the definition of the symbol.

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Need to refer to a particular code in the system.

A representation of the meaning of the code in the system, following the rules of the system.

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

Indicates how quickly the ServiceRequest should be addressed with respect to other requests.

Identifies the level of importance to be assigned to actioning the request.

Set this to true if the record is saying that the service/procedure should NOT be performed.

In general, only the code and timeframe will be present, though occasional additional qualifiers such as body site or even performer could be included to narrow the scope of the prohibition. If the ServiceRequest.code and ServiceRequest.doNotPerform both contain negation, that will reinforce prohibition and should not have a double negative interpretation.

Used for do not ambulate, do not elevate head of bed, do not flush NG tube, do not take blood pressure on a certain arm, etc.

Código y nombre del procedimiento o tecnología en salud, según la Clasificación Única de Procedimientos en Salud (CUPS), utilizado para identificar el procedimiento solicitado en la orden.

Many laboratory and radiology procedure codes embed the specimen/organ system in the test order name, for example, serum or serum/plasma glucose, or a chest x-ray. The specimen might not be recorded separately from the test code.

Codes for tests or services that can be carried out by a designated individual, organization or healthcare service. For laboratory, LOINC is (preferred)[http://build.fhir.org/terminologies.html#preferred] and a valueset using LOINC Order codes is available here.

A reference to a code defined by a terminology system.

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Allows for alternative encodings within a code system, and translations to other code systems.

The identification of the code system that defines the meaning of the symbol in the code.

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

Need to be unambiguous about the source of the definition of the symbol.

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Need to refer to a particular code in the system.

A representation of the meaning of the code in the system, following the rules of the system.

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

Additional details and instructions about the how the services are to be delivered. For example, and order for a urinary catheter may have an order detail for an external or indwelling catheter, or an order for a bandage may require additional instructions specifying how the bandage should be applied.

For information from the medical record intended to support the delivery of the requested services, use the supportingInformation element.

Codified order entry details which are based on order context.

An amount of service being requested which can be a quantity ( for example $1,500 home modification), a ratio ( for example, 20 half day visits per month), or a range (2.0 to 1.8 Gy per fraction).

When ordering a service the number of service items may need to be specified separately from the the service item.

La persona que desepeña el rol de paciente o usuario de los servicios de salud.

El encuentro de atención en salud durante el cual se realizó la prescripción del procedimiento (tecnología en salud).

The date/time at which the requested service should occur.

If a CodeableConcept is present, it indicates the pre-condition for performing the service. For example "pain", "on flare-up", etc.

A coded concept identifying the pre-condition that should hold prior to performing a procedure. For example "pain", "on flare-up", etc.

La fecha en que se realizó la prescripción u orden del procedimiento (tecnología en salud).

Formato de fecha AAAA-MM-DD

La persona que en su rol de profesional de la salud, realizó la prescripción u orden del procedimiento (tecnología en salud).

This not the dispatcher, but rather who is the authorizer. This element is not intended to handle delegation which would generally be managed through the Provenance resource.

Desired type of performer for doing the requested service.

This is a role, not a participation type. In other words, does not describe the task but describes the capacity. For example, “compounding pharmacy”, “psychiatrist” or “internal referral”.

Indicates specific responsibility of an individual within the care team, such as "Primary physician", "Team coordinator", "Caregiver", etc.

The desired performer for doing the requested service. For example, the surgeon, dermatopathologist, endoscopist, etc.

If multiple performers are present, it is interpreted as a list of alternative performers without any preference regardless of order. If order of preference is needed use the request-performerOrder extension. Use CareTeam to represent a group of performers (for example, Practitioner A and Practitioner B).

The preferred location(s) where the procedure should actually happen in coded or free text form. E.g. at home or nursing day care center.

A location type where services are delivered.

A reference to the the preferred location(s) where the procedure should actually happen. E.g. at home or nursing day care center.

Código que permite identificar la finalidad del procedimiento realizado, de acuerdo con la taxonomía definida por el Ministerio de Salud y Protección Social para la clasificación de procedimientos, dispositivos y medicamentos.

This element represents why the referral is being made and may be used to decide how the service will be performed, or even if it will be performed at all. Use CodeableConcept.text element if the data is free (uncoded) text as shown in the CT Scan example.

Indicates another resource that provides a justification for why this service is being requested. May relate to the resources referred to in supportingInfo.

This element represents why the referral is being made and may be used to decide how the service will be performed, or even if it will be performed at all. To be as specific as possible, a reference to Observation or Condition should be used if available. Otherwise when referencing DiagnosticReport it should contain a finding in DiagnosticReport.conclusion and/or DiagnosticReport.conclusionCode. When using a reference to DocumentReference, the target document should contain clear findings language providing the relevant reason for this service request. Use the CodeableConcept text element in ServiceRequest.reasonCode if the data is free (uncoded) text as shown in the CT Scan example.

Insurance plans, coverage extensions, pre-authorizations and/or pre-determinations that may be needed for delivering the requested service.

Additional clinical information about the patient or specimen that may influence the services or their interpretations. This information includes diagnosis, clinical findings and other observations. In laboratory ordering these are typically referred to as "ask at order entry questions (AOEs)". This includes observations explicitly requested by the producer (filler) to provide context or supporting information needed to complete the order. For example, reporting the amount of inspired oxygen for blood gas measurements.

To represent information about how the services are to be delivered use the instructions element.

One or more specimens that the laboratory procedure will use.

Many diagnostic procedures need a specimen, but the request itself is not actually about the specimen. This element is for when the diagnostic is requested on already existing specimens and the request points to the specimen it applies to. Conversely, if the request is entered first with an unknown specimen, then the Specimen resource points to the ServiceRequest.

Anatomic location where the procedure should be performed. This is the target site.

Only used if not implicit in the code found in ServiceRequest.code. If the use case requires BodySite to be handled as a separate resource instead of an inline coded element (e.g. to identify and track separately) then use the standard extension procedure-targetBodyStructure.

Codes describing anatomical locations. May include laterality.

Knowing where the procedure is performed is important for tracking if multiple sites are possible.

Any other notes and comments made about the service request. For example, internal billing notes.

Instructions in terms that are understood by the patient or consumer.

Key events in the history of the request.

This might not include provenances for all versions of the request – only those deemed “relevant” or important. This SHALL NOT include the Provenance associated with this current version of the resource. (If that provenance is deemed to be a “relevant” change, it will need to be added as part of a later update. Until then, it can be queried directly as the Provenance that points to this version using _revinclude All Provenances should have some historical version of this Request as their subject.

Código que indica el estado actual de la orden o solicitud. Para este perfil, el valor debe ser 'active', ya que se refiere a medicamentos ordenados al egreso del encuentro de atención en salud.

Código que indica la intención de la orden o solicitud. Para este perfil, el valor debe ser 'order', ya que se refiere a una solicitud formal de administración de un medicamento.

Indica el tipo de tecnología en salud, específicamente el tipo de medicamento administrado, según la clasificación oficial establecida por el Ministerio de Salud y Protección Social de Colombia.

Código y nombre del procedimiento o tecnología en salud, según la Clasificación Única de Procedimientos en Salud (CUPS), utilizado para identificar el procedimiento solicitado en la orden.

La persona que desepeña el rol de paciente o usuario de los servicios de salud.

El encuentro de atención en salud durante el cual se realizó la prescripción del procedimiento (tecnología en salud).

La fecha en que se realizó la prescripción u orden del procedimiento (tecnología en salud).

Formato de fecha AAAA-MM-DD

La persona que en su rol de profesional de la salud, realizó la prescripción u orden del procedimiento (tecnología en salud).

Código que permite identificar la finalidad del procedimiento realizado, de acuerdo con la taxonomía definida por el Ministerio de Salud y Protección Social para la clasificación de procedimientos, dispositivos y medicamentos.

A record of a request for service such as diagnostic investigations, treatments, or operations to be performed.

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

When the resource last changed - e.g. when the version changed.

This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.

In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

Security Labels from the Healthcare Privacy and Security Classification System.

Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

The base language in which the resource is written.

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

A human language.

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Identifiers assigned to this order instance by the orderer and/or the receiver and/or order fulfiller.

The identifier.type element is used to distinguish between the identifiers assigned by the orderer (known as the 'Placer' in HL7 v2) and the producer of the observations in response to the order (known as the 'Filler' in HL7 v2). For further discussion and examples see the resource notes section below.

The URL pointing to a FHIR-defined protocol, guideline, orderset or other definition that is adhered to in whole or in part by this ServiceRequest.

Note: This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

The URL pointing to an externally maintained protocol, guideline, orderset or other definition that is adhered to in whole or in part by this ServiceRequest.

This might be an HTML page, PDF, etc. or could just be a non-resolvable URI identifier.

Plan/proposal/order fulfilled by this request.

The request takes the place of the referenced completed or terminated request(s).

A shared identifier common to all service requests that were authorized more or less simultaneously by a single author, representing the composite or group identifier.

Requests are linked either by a "basedOn" relationship (i.e. one request is fulfilling another) or by having a common requisition. Requests that are part of the same requisition are generally treated independently from the perspective of changing their state or maintaining them after initial creation.

Some business processes need to know if multiple items were ordered as part of the same "requisition" for billing or other purposes.

Código que indica el estado actual de la orden o solicitud. Para este perfil, el valor debe ser 'active', ya que se refiere a medicamentos ordenados al egreso del encuentro de atención en salud.

The status is generally fully in the control of the requester - they determine whether the order is draft or active and, after it has been activated, competed, cancelled or suspended. States relating to the activities of the performer are reflected on either the corresponding event (see Event Pattern for general discussion) or using the Task resource.

The status of a service order.

Código que indica la intención de la orden o solicitud. Para este perfil, el valor debe ser 'order', ya que se refiere a una solicitud formal de administración de un medicamento.

This element is labeled as a modifier because the intent alters when and how the resource is actually applicable.

The kind of service request.

Indica el tipo de tecnología en salud, específicamente el tipo de medicamento administrado, según la clasificación oficial establecida por el Ministerio de Salud y Protección Social de Colombia.

There may be multiple axis of categorization depending on the context or use case for retrieving or displaying the resource. The level of granularity is defined by the category concepts in the value set.

Classification of the requested service.

Used for filtering what service request are retrieved and displayed.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

A reference to a code defined by a terminology system.

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Allows for alternative encodings within a code system, and translations to other code systems.

A reference to a code defined by a terminology system.

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Allows for alternative encodings within a code system, and translations to other code systems.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

The identification of the code system that defines the meaning of the symbol in the code.

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

Need to be unambiguous about the source of the definition of the symbol.

The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Need to refer to a particular code in the system.

A representation of the meaning of the code in the system, following the rules of the system.

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

Very often the text is the same as a displayName of one of the codings.

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Indicates how quickly the ServiceRequest should be addressed with respect to other requests.

Identifies the level of importance to be assigned to actioning the request.

Set this to true if the record is saying that the service/procedure should NOT be performed.

In general, only the code and timeframe will be present, though occasional additional qualifiers such as body site or even performer could be included to narrow the scope of the prohibition. If the ServiceRequest.code and ServiceRequest.doNotPerform both contain negation, that will reinforce prohibition and should not have a double negative interpretation.

Used for do not ambulate, do not elevate head of bed, do not flush NG tube, do not take blood pressure on a certain arm, etc.

Código y nombre del procedimiento o tecnología en salud, según la Clasificación Única de Procedimientos en Salud (CUPS), utilizado para identificar el procedimiento solicitado en la orden.

Many laboratory and radiology procedure codes embed the specimen/organ system in the test order name, for example, serum or serum/plasma glucose, or a chest x-ray. The specimen might not be recorded separately from the test code.

Codes for tests or services that can be carried out by a designated individual, organization or healthcare service. For laboratory, LOINC is (preferred)[http://build.fhir.org/terminologies.html#preferred] and a valueset using LOINC Order codes is available here.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

A reference to a code defined by a terminology system.

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Allows for alternative encodings within a code system, and translations to other code systems.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

The identification of the code system that defines the meaning of the symbol in the code.

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

Need to be unambiguous about the source of the definition of the symbol.

The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Need to refer to a particular code in the system.

A representation of the meaning of the code in the system, following the rules of the system.

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

Very often the text is the same as a displayName of one of the codings.

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Additional details and instructions about the how the services are to be delivered. For example, and order for a urinary catheter may have an order detail for an external or indwelling catheter, or an order for a bandage may require additional instructions specifying how the bandage should be applied.

For information from the medical record intended to support the delivery of the requested services, use the supportingInformation element.

Codified order entry details which are based on order context.

An amount of service being requested which can be a quantity ( for example $1,500 home modification), a ratio ( for example, 20 half day visits per month), or a range (2.0 to 1.8 Gy per fraction).

When ordering a service the number of service items may need to be specified separately from the the service item.

La persona que desepeña el rol de paciente o usuario de los servicios de salud.

El encuentro de atención en salud durante el cual se realizó la prescripción del procedimiento (tecnología en salud).

The date/time at which the requested service should occur.

If a CodeableConcept is present, it indicates the pre-condition for performing the service. For example "pain", "on flare-up", etc.

A coded concept identifying the pre-condition that should hold prior to performing a procedure. For example "pain", "on flare-up", etc.

La fecha en que se realizó la prescripción u orden del procedimiento (tecnología en salud).

Formato de fecha AAAA-MM-DD

La persona que en su rol de profesional de la salud, realizó la prescripción u orden del procedimiento (tecnología en salud).

This not the dispatcher, but rather who is the authorizer. This element is not intended to handle delegation which would generally be managed through the Provenance resource.

Desired type of performer for doing the requested service.

This is a role, not a participation type. In other words, does not describe the task but describes the capacity. For example, “compounding pharmacy”, “psychiatrist” or “internal referral”.

Indicates specific responsibility of an individual within the care team, such as "Primary physician", "Team coordinator", "Caregiver", etc.

The desired performer for doing the requested service. For example, the surgeon, dermatopathologist, endoscopist, etc.

If multiple performers are present, it is interpreted as a list of alternative performers without any preference regardless of order. If order of preference is needed use the request-performerOrder extension. Use CareTeam to represent a group of performers (for example, Practitioner A and Practitioner B).

The preferred location(s) where the procedure should actually happen in coded or free text form. E.g. at home or nursing day care center.

A location type where services are delivered.

A reference to the the preferred location(s) where the procedure should actually happen. E.g. at home or nursing day care center.

Código que permite identificar la finalidad del procedimiento realizado, de acuerdo con la taxonomía definida por el Ministerio de Salud y Protección Social para la clasificación de procedimientos, dispositivos y medicamentos.

This element represents why the referral is being made and may be used to decide how the service will be performed, or even if it will be performed at all. Use CodeableConcept.text element if the data is free (uncoded) text as shown in the CT Scan example.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

A reference to a code defined by a terminology system.

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Allows for alternative encodings within a code system, and translations to other code systems.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

The identification of the code system that defines the meaning of the symbol in the code.

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

Need to be unambiguous about the source of the definition of the symbol.

The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Need to refer to a particular code in the system.

A representation of the meaning of the code in the system, following the rules of the system.

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

Very often the text is the same as a displayName of one of the codings.

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Indicates another resource that provides a justification for why this service is being requested. May relate to the resources referred to in supportingInfo.

This element represents why the referral is being made and may be used to decide how the service will be performed, or even if it will be performed at all. To be as specific as possible, a reference to Observation or Condition should be used if available. Otherwise when referencing DiagnosticReport it should contain a finding in DiagnosticReport.conclusion and/or DiagnosticReport.conclusionCode. When using a reference to DocumentReference, the target document should contain clear findings language providing the relevant reason for this service request. Use the CodeableConcept text element in ServiceRequest.reasonCode if the data is free (uncoded) text as shown in the CT Scan example.

Insurance plans, coverage extensions, pre-authorizations and/or pre-determinations that may be needed for delivering the requested service.

Additional clinical information about the patient or specimen that may influence the services or their interpretations. This information includes diagnosis, clinical findings and other observations. In laboratory ordering these are typically referred to as "ask at order entry questions (AOEs)". This includes observations explicitly requested by the producer (filler) to provide context or supporting information needed to complete the order. For example, reporting the amount of inspired oxygen for blood gas measurements.

To represent information about how the services are to be delivered use the instructions element.

One or more specimens that the laboratory procedure will use.

Many diagnostic procedures need a specimen, but the request itself is not actually about the specimen. This element is for when the diagnostic is requested on already existing specimens and the request points to the specimen it applies to. Conversely, if the request is entered first with an unknown specimen, then the Specimen resource points to the ServiceRequest.

Anatomic location where the procedure should be performed. This is the target site.

Only used if not implicit in the code found in ServiceRequest.code. If the use case requires BodySite to be handled as a separate resource instead of an inline coded element (e.g. to identify and track separately) then use the standard extension procedure-targetBodyStructure.

Codes describing anatomical locations. May include laterality.

Knowing where the procedure is performed is important for tracking if multiple sites are possible.

Any other notes and comments made about the service request. For example, internal billing notes.

Instructions in terms that are understood by the patient or consumer.

Key events in the history of the request.

This might not include provenances for all versions of the request – only those deemed “relevant” or important. This SHALL NOT include the Provenance associated with this current version of the resource. (If that provenance is deemed to be a “relevant” change, it will need to be added as part of a later update. Until then, it can be queried directly as the Provenance that points to this version using _revinclude All Provenances should have some historical version of this Request as their subject.